APERIO

APERIO : from the Latin, meaning to uncover, open, reveal. The model name for Warwick Acoustics’ flagship, reference headphone system is a literal match for our design goal: to reproduce and reveal all recorded audio content definitively, without alteration.

The APERIO reference headphone system strives to deliver the highest level of audio performance achievable, by means of our proprietary planar electrostatic technology. Utilises a highly-refined, evolutionary advancement of technology originally developed by Warwick Acoustics for it’s ground-breaking and multi-award-winning Sonoma Model One Headphone System.

The APERIO is designed for the demanding professional audio market, as a reference studio monitor headphone system for High-Resolution Audio production, mastering, mixing and recording applications. Moreover, the APERIO is designed to be equally capable in ultra-high-end home consumer applications.

From the pioneers of high-resolution audio (Hi-Res Audio).

Discover the multi-award winning APERIO reference electrostatic headphone system.

Headphones

For the APERIO headphone, Warwick Acoustics had two primary design objectives:
The headphone must provide the optimum mechanical and acoustical conditions for the BD-HPEL transducer that enable the best audio performance and sound quality possible to be achieved and the headphone must be comfortable for the user, even under critical monitoring conditions, for extended periods of time.

BD-HPEL Transducer

The APERIO utilises a new Balanced-Drive HPEL Transducer (BD-HPEL) – a symmetrically-driven variant of Warwick Acoustics’ High Precision Electrostatic Laminate (HPEL) transducer, originally developed for the Sonoma Model One headphone system. The BD-HPEL was developed specifically for applications that demand the highest level of audio resolution and greater output capability.

This next-generation HPEL transducer is built in the United Kingdom, at Warwick Acoustics’ state-of-the-art R&D facility. The BD-HPEL is manufactured under strict laboratory conditions using proprietary, semi-automated, cell-based production techniques. The BD-HPEL retains Warwick Acoustics’ patented cellular structure, which acts to significantly reduce and distribute resonant phenomena, and extends bandwidth to over 60 kHz. Subdivided cells act as smaller, phase-aligned planar sources, whose parallel-driven outputs combine acoustically to form a cohesive planar wave front.

Every transducer produced is tested in our lab, graded and matched within 0.5 dB to a complementary unit to form a matched-pair. Only the best-performing matched-pairs of BD-HPELs are installed in APERIO headphones.

Injected Magnesium Ear cups

Major structural components of the headphone, for example, the ear cups, are fabricated of injected Magnesium – a rigid material lighter and significantly better-damped than aluminium. Key structural fasteners are fabricated from stainless steel for strength and durability. Gaskets are formed from closed-cell foams that are well-damped and free from compression-set.

The development team carefully designed the ear cup components to minimise acoustical reflections and diffraction, on both sides of the transducer. Similarly, acoustic impedance is optimal on each side of the transducer. The APERIO is extremely “open” to the surrounding air, with a minimum of obstruction between the transducer diaphragm and the listener’s ear. Unlike most headphones, the APERIO does not have regions over the transducer covered with acoustical materials that impede air flow or spectrally filter the sound (aka, passive equalisation). This common approach is not needed for the APERIO and has deleterious effects on sound quality, especially with regard to detail, resolution and sonic neutrality.

Ear Cushions

The ear cushions are designed to improve cooling around the user’s ears via perforated top surfaces and a copper thread mesh that dissipates heat. The ear cushions are covered in the finest, natural, top grain Cabretta leather that is sustainably sourced.

In order to achieve outstanding low frequency performance, the APERIO requires a small sealed air volume between the transducer and listener’s head. The APERIO maintains this air volume and requisite air seal through key design features that eliminate air leakage, even with variations in head and ear shape.

And in order to minimise acoustical standing waves within the enclosed air volume, which in turn create resonances, the ear cushions feature acoustically-absorbent foam around their inside perimeter. The ear cushions maintain the necessary air seal to the user’s head while absorbing damaging acoustical reflections within the enclosed air volume.

Confort de los auriculares-

Headphone Comfort

The APERIO addresses comfort by minimising weight and optimising geometry. The advanced materials utilised in the design, such as Magnesium and Engineering polymers, result in a very low mass of 405 grams.

The headband has been designed around the ideal geometry for a wide range of head sizes, with the optimum clamping force to ensure a good air seal and stability on the head, without excessive pressure that could be problematic during long listening sessions. The headband maintains this optimum clamping force over the full range of adjustability (extension of the headband and ear cup position).

The APERIO is designed with a high degree of electrical isolation and multiple safety features. The BD-HPEL transducer is electrically isolated from the conductive Magnesium components.

Headphone Cable

The APERIO headphone cable is a state-of-the-art, custom design, optimised specifically for the APERIO headphone and drive electronics. The cable assembly is wrapped in an ultra-thin Teflon (PTFE) barrier layer and multifilament Nylon and Polypropylene woven fibre jackets for additional durability and a soft texture. High performance, polarised, self-latching, stainless steel connectors with gold-plated copper, multipole contacts ensure high quality, reliable electrical connections to the drive electronics and headphone

The APERIO headphone cable features a Dual Mono design with optimised conductor winding geometry and isolated shielding to minimise electrical crosstalk between channels. The electrical shielding is unique – a copper-plated Aramid fibre braid that provides excellent EMI/RFI shielding.

-cable-

Electronics

The APERIO is a complete sound reproduction system, thus the electronics are optimised specifically for the APERIO headphone. Every element of the sound reproduction chain between raw audio data input (from an analogue or digital source) and output to the headphone is included and fully optimised within the APERIO electronics.

Every functional sub-section of the electronics has been designed to state-of-the-art standards, without compromise.

Cutting-edge components

Within the APERIO electronics, all analogue circuitry and PCB routing is differential (balanced), with gain levels carefully optimised between all stages to maximise Signal-to-Noise Ratio (SNR). The topology is as simple as possible to minimise the number of stages and devices that the audio signal must pass through. All audio routing and switching is performed using the finest signal relays, with gold-plated silver contacts. All circuitry in the APERIO electronics, including power supply regulation, employs a Dual Mono topology to minimise crosstalk and interference between channels. The APERIO electronics have been designed to minimise mechanical resonances and the transmission of vibrational energy that could modulate low level audio signals in sensitive circuitry

The aluminium chassis sections interlock and are fastened together using stainless steel hardware with thread-locking compounds (to prevent loosening and vibration over time). The complete assembly rests on specialised mounting feet, formed of a highly-damped thermoplastic compound (IsoDamp C-1002), that isolate the enclosure from external shock and vibration. Internal PCBs also are very well damped due to the glass-epoxy substrate and double-thickness copper.

Analogue Line Output

The Analogue Line Output section features a novel Class A circuit that can output very high voltages with prodigious current, allowing it to effortlessly drive outboard electronics in any professional or consumer application, even with extremely long cables.

We’ve tested the Line Output section with 150-meter-long balanced cables driven to 15 dBu (12.3 Vp-p) without distortion.

Dual 32-bit, 8-channel DAC’s

The DAC section of the APERIO electronics is truly state-of-the-art. Dual 32-bit, 8-channel DACs are utilised – one per channel in dual mono configuration, to achieve a SNR of 131 dB. Each channel’s DAC section is housed within separate EMI shields (“cans”) and supplied by isolated, local, ultra-low-noise power regulators.

The APERIO features a very unique level control (volume adjustment) configuration to preserve audio quality.

Dual domain level controls are implemented – an analogue attenuator for analogue and DSD signals, and a digital attenuator for PCM digital signals. The analogue attenuator is based on parallel, laser-trimmed resistance ladder networks and is fully differential. The digital attenuator is DSP-based with optimal re-quantisation and dithering to eliminate “zipper noise” and other anomalies. Both attenuators are calibrated and matched.

Input Cables

Warwick Acoustics supplies two high performance input cables with the APERIO: a USB 2.0 Type A to B cable, and an Ethernet cable. These cables are custom designs, developed by Warwick Acoustics to match the performance and quality level of the rest of the APERIO system. Both cables utilise superior SF/FTP construction, with double overall shielding (aluminium-mylar foil and copper-plated Aramid fibre braiding) as well as internal shielding of each of the double-helix twisted pair conductors. All internal data wiring is formed from 66 strands of micro-fine OFHC copper per conductor, each plated in pure Silver. The wiring insulation is high-grade Polyethylene (PE), with a very low dielectric constant (< 2.0). The outer jackets are formed from low durometer Thermoplastic Elastomer (TPE) covered with a multifilament woven Polypropylene braid for durability and a soft texture.

The USB cable connectors are high-quality, gold-plated Type A and B plugs. The USB cable is designed to be impervious to noise, interference and emissions while maintaining an optimal 90 Ω characteristic impedance over the full operating bandwidth; it is fully compliant with USB 2.0 standards.

The Ethernet cable connectors are the finest quality, ruggedised plugs available: professional, full-metal shielded XLR (RJ45) type from Neutrik and universal, full-metal shielded RJ45 type from Telegärtner. The Ethernet cable also is designed to be impervious to noise, interference and emissions and maintains an optimal 100 Ω characteristic impedance over the full operating bandwidth. While the connectors are certified as CAT6A type, the cable is compliant with CAT7 standards.

Travel Case

The entire APERIO system (headphones, electronics and accessories) is packaged in an exceptional transport case made of high-strength polypropylene. It is totally waterproof, shockproof and dustproof. It incorporates an automatic pressure equalization valve that balances the internal pressure.

The case features a retractable extension handle, stainless steel rivets and four polyurethane wheels. Its resistance provides complete protection for the entire APERIO system and allows it to be transported comfortably and safely.

SPECIFICATIONS

HEADPHONES

ELECTRONICS